BALLAST USAGE

The Lumatek Controllable Ballast 600W provides a stable precise voltage to the lamp creating a higher PAR/PPF output and yet is far more energy efficient than most other ballasts on the market. The latest high output 600W horticultural ballasts from Lumatek are designed to give high yields and top quality results, year after year.

BALLAST TECHNOLOGY

Featuring 4 different settings from 250w to 660W, this ballast can be used progressively to ensure the optimum performance at each stage of your grow and can be used with both high pressure sodium or metal halide lamps.

Featuring intelligent start up and soft-dimming facility the Lumatek 600W runs extremely efficiently generating much less heat than other conventional ballasts and runs silently.

It also features full circuit protection including open/short circuit, over temperature, over/low voltage, end of lamp life/rectification and EMI suppression.

600 W
240 V

HPS/MH




KEY SPECIFICATIONS

Product Code: LUMBC002
Output power: 600W
Input Voltage: 240V 50/60Hz
Input Current Max (A): 2.70A
Input power: 630W
Power factor: >0.99
Efficiency: 96%
THD: <8%
Dimming: 250W – 400W – 600W – 660W
Lamp: 250W, 400W & 600W HPS or MH
Lamp CCF: <1.7
Operating frequency: high frequency
Dimensions: 310 x 114 x 81mm
Weight: 2.7 Kg
Protection: Open circuit, short circuit, over temperature, lamp end of life, over voltage, low voltage



KEY FEATURES

Full circuit protection; open/short, over temperature, over/low voltage, end of lamp life/rectification

• High efficiency, energy-saving
• Controllable option via remote Lumatek Digital Controller
• Completely silent and maximum heat dissipation
• RF shielding
• LED status indicator
• Full protection
• Soft start technology
• Random start technology
• Automatic frequency adjustment
• Re-strike system
• 5 years warranty
• CE Certification
• EMI suppression certified

CONTROL SYSTEMS

This Lumatek LED fixture is fully compatible with external control systems, including the Lumatek Digital Panel Plus 2.0. Manage light timing, automated dimming in one per cent increments, temperature safety features, and dynamic Sunrise and Sunset Modes. Control up to 100 fixtures from a single controller and fine-tune your lighting environment with professional precision.

Universal Control Systems Compatibility

Whether you´re using Lumatek´s controller or another system with a 0-10V output signal, you´re covered. Even if your setup includes a controller with an RJ port interface, our LED fixtures remain compatible by using a signal converter that adapts the RJ port to 0-10V control. That means flexibility across platforms without needing to overhaul your existing gear. Designed for scalability and ease of integration, Lumatek empowers growers to take full command of their lighting setups, from tents to large-scale operations.

600W 240V
CONTROLLABLE BALLAST


Request Information About This Product:

    For product information:

    For technical support:

    WHY LED?



    • Benefits include energy savings; Lumatek LED solutions demonstrate the potential to save 40% on electricity and studies indicate that LED-lit canopies can generate more yield per kWh.
    • Plant and crop performance; initial studies indicate growers using LED lighting may experience yield increases and changes in cannabinoid and terpene profiles, leading to more consistent medicinal product profiles from harvest to harvest.
    • Flexible light intensity; Lumatek LEDs can be dimmed to adjust PPF level to suit crop and growth stage without changing spectral power distribution or losing efficiency.
    • Less maintenance; Lumatek LEDs are rated for 60,000 hours use supported by a market leading 5 Year warranty.
    • Reduced HVAC; Lumatek LEDs are highly efficient and a less wattage consumption means less heat released into the space, allowing for potentially lower HVAC loads and operating expense.
    • Safety; Lumatek LEDs are highly efficient and a less wattage consumption means less hLumatek LED drivers are intelligent and feature full circuit protection including over/under voltage, short circuit and over temperature protection. Lumatek Zeus LED drivers also feature auto-power increase/decrease to match the amount of light bars connected to fixture. All Lumatek LED fixtures are CE certified LVD and EMC compliant.

    This website stores cookies on your computer. Cookie Policy

    This site is registered on wpml.org as a development site. Switch to a production site key to remove this banner.