All-in-One Fixture

The all-new Lumatek Utopia 630W/600W DE CMH/HPS controllable fixture uses the latest in microprocessor-controlled electronics, to power both high-voltage CMH and HPS grow lamps – which are the most efficient HID light source for horticulture farming – allowing for both possibilities without additional expense.

Designed for use in climate-controlled grow rooms, tents & greenhouses, the Utopia is an integrated all in one fixture with a high performing digital ballast linking to a double-ended (DE) lamp holder in a premium 97% reflective hammer-tone alanod aluminium focal reflector.

BALLAST TECHNOLOGY

Using our HID extension cable the Utopia fixtures ballast can also be disconnected from the reflector and used remotely for more flexibility.

The Utopia fixture is both manually dimmable and can be externally controlled using the Lumatek Control Panel for up to 400 fixtures per controller unit, with automated and temperature-controlled dimming and safety protection for even greater precision, assurance and control.

630W/600W

240V 50/60Hz


630W CMH DE 240V & 600W HPS DE 400V


LAMP TECHNOLOGY

The Utopia 630W/600W fixture/ballast can drive both high or low voltage 600W HPS and 630W CMH DE grow lamps. Reducing the need for different ballasts/fixtures for each light source and thus reducing cost and maximising efficiency and flexibility to all growers.

It features three manual power settings at 80%-90%-100% with externally-controlled light intensity from 80% – 110% in 1% increments using a Lumatek control panel.

630W/600W

240V 50/60Hz


• 97% reflective Alanod Hammertone Focal
• 97% reflective Hammertone Wide Reflector also available




KEY SPECIFICATIONS

Product Code: LUMFK011
Input Voltage: 220-240V 50/60Hz
Power Consumption (at 100%): 660W
Input Current: 2.7 – 3.0A
Efficacy: 95%
Light Distribution: 140º
Lamps: 630W CMH DE 240V & 600W HPS DE 400V
Reflector: 97% reflective Alanod Hammertone Focal
Dimmable: 80%-90%-100%
Power Factor: >0.98
THD: <10%
External Control: With Lumatek Digital Panel
Dimensions: 712x251x108 mm
Weight: 4.35 Kg
Certificates: CE



KEY FEATURES

- High output and efficacy
- Powers two different technologies: CMH & HPS
- Designed for best performance with 600W HPS & 630W CMH Lamps
- 97% reflective Hammertone Focal Reflector
- Complete & Balanced Fixture
- Detachable ballast for remote use
- Plug & Play installation
- Manually dimmable 80%-90%-100%
- Externally-controllable with Lumatek Digital Panel
- Lamps sold separately
- 97% reflective Hammertone Wide Reflector also available

ITEMS INCLUDED:
1 x Lumatek 220-240V Utopia 630W/600W CMH/HPS Ballast
1 x Fixture, Housing and connecting cables
1 x 97% reflective Hammertone Focal Reflector
2 x Metal Hooks
1 x Steel Cable (Remote Hanging)
1 x Manual

630W/600W

240V 50/60Hz


CONTROL SYSTEMS

This Lumatek LED fixture is fully compatible with external control systems, including the Lumatek Digital Panel Plus 2.0. Manage light timing, automated dimming in one per cent increments, temperature safety features, and dynamic Sunrise and Sunset Modes. Control up to 100 fixtures from a single controller and fine-tune your lighting environment with professional precision.

Universal Control Systems Compatibility

Whether you´re using Lumatek´s controller or another system with a 0-10V output signal, you´re covered. Even if your setup includes a controller with an RJ port interface, our LED fixtures remain compatible by using a signal converter that adapts the RJ port to 0-10V control. That means flexibility across platforms without needing to overhaul your existing gear. Designed for scalability and ease of integration, Lumatek empowers growers to take full command of their lighting setups, from tents to large-scale operations.

Utopia 630W/600W DE CMH/HPS

220-240V Current Utopia 630W/600W Fixture designed to run CMH & HPS Lamps under a 97% reflective Hammertone Focal Reflector


Request Information About This Product:

    For product information:

    For technical support:

    WHY LED?



    • Benefits include energy savings; Lumatek LED solutions demonstrate the potential to save 40% on electricity and studies indicate that LED-lit canopies can generate more yield per kWh.
    • Plant and crop performance; initial studies indicate growers using LED lighting may experience yield increases and changes in cannabinoid and terpene profiles, leading to more consistent medicinal product profiles from harvest to harvest.
    • Flexible light intensity; Lumatek LEDs can be dimmed to adjust PPF level to suit crop and growth stage without changing spectral power distribution or losing efficiency.
    • Less maintenance; Lumatek LEDs are rated for 60,000 hours use supported by a market leading 5 Year warranty.
    • Reduced HVAC; Lumatek LEDs are highly efficient and a less wattage consumption means less heat released into the space, allowing for potentially lower HVAC loads and operating expense.
    • Safety; Lumatek LEDs are highly efficient and a less wattage consumption means less hLumatek LED drivers are intelligent and feature full circuit protection including over/under voltage, short circuit and over temperature protection. Lumatek Zeus LED drivers also feature auto-power increase/decrease to match the amount of light bars connected to fixture. All Lumatek LED fixtures are CE certified LVD and EMC compliant.
    MANUFACTURER

    WARRANTY

    To enhance the quality of our warranty, we work closely with local distributors to make sure that our customers are treated with the necessary proximity. Please consult our Warranty terms and conditions to find out more.
    All widely recognized by the grower community around the world.

    This website stores cookies on your computer. Cookie Policy

    This site is registered on wpml.org as a development site. Switch to a production site key to remove this banner.