VF Range

Lumatek has innovated again and come up with the ideal LED fixture for Seedlings, Clones and for any low PPFD target plants. Meet the new VF90W, with Vertical Farming Range (VF Range).

These versatile high efficacy fixtures will ensure you reach your goals when used in Vertical Farming applications. From propagation factories and nurseries, climate chambers, warehouse farms, containers, between others, the Lumatek VF range will deliver the adequate light quality spectral and photon flux levels you need.

DIODE TECHNOLOGY

The VF90W comprises of four 30W LED bars with 4000K White and 3000K Warm White diodes, with a total PPF output of 308 μmol/s and a 2.4 μmol/J Efficacy.

The VF range already includes the new cllear Glue protection cover technology on the LED bars; resulting in higher light transmittance of 99% without light loss, extended lifetime of diodes, extra corrosion resistance and high waterproof of IP65. For basic maintenance, simply clean the bars with wet cotton.

2.4 EFFICACY
µmol/J

308 PPF
µmol/s


Top bin White 4000K and Warm White 3000K LEDs


PRODUCT CONFIGURATION

The fixture will require a 650W Driver (sold separately) that can run up to 5 units of VF90W fixtures, and can be dimmed with a 0-10V Light Dimmer (also sold separately) or externally controlled with our Digital Panel Plus 2.0 or any other Universal Controller 0-10V. Also, the daisy-chain driver connectivity is possible if you would like to add more units to your system so you can dim all fixture with a single dimmer.

For large facilities, where the 3-Phase electrical supply domains, a 400 Volts, 650W Driver is more suitable.

2.4 EFFICACY
µmol/J

308 PPF
µmol/s


• Powered by a 650W Driver sold separately, that can run up to 5 Fixtures
• 4x 30W LED bars attached to the frame




KEY SPECIFICATIONS

PRODUCT CODE: LUMLED014
EFFICACY: 2.4 μmol/J
PPF: 244 μmol/s
INPUT VOLTAGE: 220-240V, 50-60Hz
INPUT VOLTAGE (Large Facilities Driver): 277-480V, 50-60Hz
INPUT POWER (100%): 103W @ 230V
WATERPROOF: IP65
LIFETIME: +60000hrs
LIGHT DISTRIBUTION: 120º
LIGHT SOURCE: High Spec White & Warm White Diodes
THERMAL MANAGEMENT: Passive Cooling
DIMMABLE: OFF-25-50-75-100% with Dimmer connected to the main 600W driver
EXTERNAL CONTROL: Lumatek Digital Panel Plus 2.0 or Universal Controllers 0-10V
DRIVER: 650W Driver (Sold Separately), each one can run of to 7 x VF90W Fixtures
WEIGHT: 1.72Kg
DIMENSIONS: 1207 x 521 x 20.5mm
FOOTPRINT: 1.2 x 0.5 m



KEY FEATURES

- Ideal Spectrum and Light Intensity for low PPFD target plants
- Efficacy of 2.4 µmol/J
- PPF of 244 µmol/s
- Includes three 30W LED bars attached to the frame
- Top bin White 4000K and Warm White 3000K LEDs
- External control with Lumatek Control Panel Plus 2.0 or Universal Controllers 0-10V
- Fully Dimmable an In-Series Link Option
- High heat dissipation
- Shorten Plant Growth Cycle
- Powered by a 650W Driver sold separately, that can run up to 7 VF90W Fixtures
- User friendly Plug & Play Assembling
- IP65 Water & Dustproof rated
- 3 Year Warranty

ITEMS INCLUDED:
- 1 x VF90W LED Fixture

2.4 EFFICACY
µmol/J

308 PPF
µmol/s


CONTROL SYSTEMS

This Lumatek LED fixture is fully compatible with external control systems, including the Lumatek Digital Panel Plus 2.0. Manage light timing, automated dimming in one per cent increments, temperature safety features, and dynamic Sunrise and Sunset Modes. Control up to 100 fixtures from a single controller and fine-tune your lighting environment with professional precision.

Universal Control Systems Compatibility

Whether you´re using Lumatek´s controller or another system with a 0-10V output signal, you´re covered. Even if your setup includes a controller with an RJ port interface, our LED fixtures remain compatible by using a signal converter that adapts the RJ port to 0-10V control. That means flexibility across platforms without needing to overhaul your existing gear. Designed for scalability and ease of integration, Lumatek empowers growers to take full command of their lighting setups, from tents to large-scale operations.


VF90W LED

VF90W LED producing a PPF of 308 µmol/s achieving a very high efficacy of 2.4 µmol/J.


Request Information About This Product:

    For product information:

    For technical support:

    WHY LED?



    • Benefits include energy savings; Lumatek LED solutions demonstrate the potential to save 40% on electricity and studies indicate that LED-lit canopies can generate more yield per kWh.
    • Plant and crop performance; initial studies indicate growers using LED lighting may experience yield increases and changes in cannabinoid and terpene profiles, leading to more consistent medicinal product profiles from harvest to harvest.
    • Flexible light intensity; Lumatek LEDs can be dimmed to adjust PPF level to suit crop and growth stage without changing spectral power distribution or losing efficiency.
    • Less maintenance; Lumatek LEDs are rated for 60,000 hours use supported by a market leading 5 Year warranty.
    • Reduced HVAC; Lumatek LEDs are highly efficient and a less wattage consumption means less heat released into the space, allowing for potentially lower HVAC loads and operating expense.
    • Safety; Lumatek LEDs are highly efficient and a less wattage consumption means less hLumatek LED drivers are intelligent and feature full circuit protection including over/under voltage, short circuit and over temperature protection. Lumatek Zeus LED drivers also feature auto-power increase/decrease to match the amount of light bars connected to fixture. All Lumatek LED fixtures are CE certified LVD and EMC compliant.
    MANUFACTURER

    WARRANTY

    To enhance the quality of our warranty, we work closely with local distributors to make sure that our customers are treated with the necessary proximity. Please consult our Warranty terms and conditions to find out more.
    All widely recognized by the grower community around the world.

    This website stores cookies on your computer. Cookie Policy

    This site is registered on wpml.org as a development site. Switch to a production site key to remove this banner.