EFFICACY & PPF

The higher specification Lumatek Zeus 1000W Xtreme PPFD CO2 LED is a linear multi-light bar fixture producing extremely high levels of PPF of 2925 µmol/s and a very high efficacy of up to 2.9 umol/J.

The Zeus 1000W Xtreme PPFD CO2 produces extreme high levels of light intensity which requires the use of supplemental CO2 for those who plan to grow on 1.5 × 1.5m grow areas with short distances from Canopy to the light.

DIODE TECHNOLOGY

The new line of Zeus is built using high quality Lumatek drivers and latest generation top bin LEDs from Lumileds and Osram, generating a full-spectrum light source ideal for veg and flowering cycles. Another new feature of this line is the Clear Glue protection cover technology on the LED bars; resulting in higher light transmittance of 99% without light loss, extended lifetime of diodes, extra corrosion resistance and high waterproof of IP65. For basic maintenance, simply clean the bars with wet cotton.

For different cultivars, propagation and vegetative growth periods the Zeus may be dimmed without losing efficiency. The high efficiency and low powered LED configuration with 10 LED bars reduces the temperature of the LEDs increasing the output and improving light maintenance.

2.9 EFFICACY
µmol/J

2925 PPF
µmol/s

Designed to deliver utra-high PPFD
for COâ‚‚ enriched Grow Spaces

COâ‚‚ Supplementation

The use of CO2 with this fixture is not mandatory, however, if you choose to run it without CO2, we recommend a greater canopy distance to the light. This will ensure the optimal PPFD levels according to the grow stage. Using this last method the expected optimal coverage area gets to 1.8 × 1.8m but with lower levels of PPFD intensity concentration.

Supplementation use of Carbon Dioxide (CO2) in your controlled environment can significantly improve the yield of your crop if used correctly. In general a good rule is that once you exceed 1000 µmol/s/m2 PPFD levels, you should be 1:1 with CO2 PPM – up to 1500. So at max PPFD = 1500 µmol/s/m2, CO2 would be 1500 PPM (a little lower, 1400 PPM may be the safest to start).

2.9 EFFICACY
µmol/J

2925 PPF
µmol/s

• Interchangeable 100 W Pro 2.9 Magnet light bars with clear glue cover
• Detachable driver for remote use


KEY SPECIFICATIONS

PRODUCT CODE: LUMLED003
EFFICACY: up to 2.9 µmol/J
PPF: 2925 µmol/s
INPUT VOLTAGE: 220-240V, 50-60Hz
INPUT POWER: 1025W (±5%)
FOOTPRINT: 1.5x1.5m with Supp. CO2; 1.8x1.8m without Supp. CO2 used at higher heights.
WATERPROOF: IP65
LIFETIME: 60 000 Hrs
LIGHT DISTRIBUTION: 120°
LIGHT SOURCE: Higher Spec Osram and Lumileds Diodes
DIMMABLE: OFF-25%-50%-75%-100% with 0-10V Light Dimmer (Included)
EXTERNAL CONTROL: With Lumatek Digital Panel Plus 2.0
WEIGHT: 18 Kg
DIMENSIONS: 1181.2x1091x105.7mm
SPECTRUM: Full Spectrum F
BTU (WITH DRIVER ATTACHED): 3668 BTUs/h (Max)
BTU (WITH DRIVER REMOTE): 3411 BTUs/h (Max)


KEY FEATURES

- Very high efficacy up to 2.9 µmol/s/J
- High PPF output for high intensity 2925 µmol/s
- High quality Lumatek LED driver
- Designed to deliver utra-high PPFD for CO2 enriched Grow Spaces
- CO2 Supplemental: Once a PPFD of 1000 µmol/s/m2 is exceeded, a ratio of 1:1 CO2 PPM should be added
- New Clear Glue protection cover technology on LED bars
- Top bin LEDs
- Balanced full spectrum
- External control with Lumatek Control Panel Plus 2.0
- Replaceable 100W Pro 2.9 magnet light bars
- Fully Dimmable
- User friendly Plug & Play Assembling
- Detachable driver for remote use

ITEMS INCLUDED:
- 10 x Lumatek 100W Pro 2.9 Full-Spectrum Magnet Light Bars
- 1 x Lumatek 1000W Xtreme Pro Driver with Connecting Cables
- 1 x LED Structure with Connecting Cables
- 1 x 0-10V Light Dimmer + Velcro
- 2 x Metal Cable Hangers
- 1 x Manual

2.9 EFFICACY
µmol/J

2925 PPF
µmol/s

CONTROL SYSTEMS

This Lumatek LED fixture is fully compatible with external control systems, including the Lumatek Digital Panel Plus 2.0. Manage light timing, automated dimming in one per cent increments, temperature safety features, and dynamic Sunrise and Sunset Modes. Control up to 100 fixtures from a single controller and fine-tune your lighting environment with professional precision.

Universal Control Systems Compatibility

Whether you´re using Lumatek´s controller or another system with a 0-10V output signal, you´re covered. Even if your setup includes a controller with an RJ port interface, our LED fixtures remain compatible by using a signal converter that adapts the RJ port to 0-10V control. That means flexibility across platforms without needing to overhaul your existing gear. Designed for scalability and ease of integration, Lumatek empowers growers to take full command of their lighting setups, from tents to large-scale operations.
DOCUMENTS & RESOURCES
DOWNLOAD SPEC SHEET
FIND A RESELLER

ZEUS 1000W Xtreme
PPFD CO2

Producing a PPF of 2925 µmol/s achieving a very high efficacy of 2.9 µmol/J.
EFFICACY & PPF
DIODE TECHNOLOGY
PRODUCT CONFIGURATION
PRODUCT VIDEO
KEY SPECIFICATIONS
KEY FEATURES
CONTROL SYSTEMS

Request Information About This Product:

    For product information:

    For technical support:

    Related Products:

    ZEUS 1000W XTREME 3.1

    ZEUS 600W 2.6

    ZEUS 465W PRO 2.9

    50W Far-Red LED

    30W UVA+UVB Supplemental Light LED Bar

    Control Panel HID and LED 2.0

    LED Driver Remote Use 5m Extension Cables (x3) for Zeus 1000W Xtreme

    LED Daisy Chain Control Cable to link Zeus and Universal Controllers (0-10v to RJ Ethernet)

    WHY LED?



    • Benefits include energy savings; Lumatek LED solutions demonstrate the potential to save 40% on electricity and studies indicate that LED-lit canopies can generate more yield per kWh.
    • Plant and crop performance; initial studies indicate growers using LED lighting may experience yield increases and changes in cannabinoid and terpene profiles, leading to more consistent medicinal product profiles from harvest to harvest.
    • Flexible light intensity; Lumatek LEDs can be dimmed to adjust PPF level to suit crop and growth stage without changing spectral power distribution or losing efficiency.
    • Less maintenance; Lumatek LEDs are rated for 60,000 hours use supported by a market leading 5 Year warranty.
    • Reduced HVAC; Lumatek LEDs are highly efficient and a less wattage consumption means less heat released into the space, allowing for potentially lower HVAC loads and operating expense.
    • Safety; Lumatek LEDs are highly efficient and a less wattage consumption means less hLumatek LED drivers are intelligent and feature full circuit protection including over/under voltage, short circuit and over temperature protection. Lumatek Zeus LED drivers also feature auto-power increase/decrease to match the amount of light bars connected to fixture. All Lumatek LED fixtures are CE certified LVD and EMC compliant.
    MANUFACTURER

    WARRANTY

    To enhance the quality of our warranty, we work closely with local distributors to make sure that our customers are treated with the necessary proximity. Please consult our Warranty terms and conditions to find out more.
    All widely recognized by the grower community around the world.

    JOIN OUR MAILING LIST

      General Contact

      info@lumatek-lighting.com

      Technical Support

      techsupport@lumatek-lighting.com

      Returns

      info@lumatek-lighting.com

      2025 Lumatek All rights Reserved

      This website stores cookies on your computer. Cookie Policy

      This site is registered on wpml.org as a development site. Switch to a production site key to remove this banner.